What are the precautions when disassembling the roll grinder?
When disassembling the roll grinding machine, below points shoudl be pay attention when disassembling the relevant parts of the grinder.
2. When checking the guide rail or refueling, pay attention to whether there is any dirty on the guide rail, and clean it up in time;
3. When moving the tailstock of roll grinder, check whether the bolts are loosened and whether the locking hook is removed; whether the oil supply between the tailstock and the guide rail is normal.
4. When replacing the filter paper of grinding liquid, do not step on the filter paper which may cause deformation.
5. When replacing the lubrication oil for grinding wheel spindle, pay attention to whether there are crystals or sediment at the bottom of the oil tank, and clean it up in time.
6. When replacing the Babbitt alloy supporting pad, the keyway and joint surface must be kept clean;
7. When disassembling and lifting the roll, confirm that the starting device has been disengaged; keep it away from the top of the tailstock properly.