CNC machine tool roll grinder should have stability, applicability and rationality
Before starting movement, check the following components of the roll grinder:
(1) The remaining oil in the sewage tank needs to reach the specified amount.
(2) Adjust the tightness of the conveyor belt.
(3) The protective cover and grinding wheel should be firmly clamped and positioned appropriately, and the anti-fouling felt pad should be close to each other.
(4) Check whether the electrical control system is intact and the surrounding environment should be clean and free of short circuit faults.
(5) According to the instructions of the roller mill, add grease to the lubrication area.
(6) Turn on the main power supply, run the gasoline pump and other motors one after another, and pay attention to the operation. If any abnormal appearance or noise is found, the power should be cut off immediately.
(7) Run the roller mill at high speed for 3 minutes, check whether there are any problems with each position, check whether the za is normal, and whether the refrigerant is smooth.
(8) Before installing the grinding wheel, prevent the grinding wheel from getting wet and conduct a balance test; prohibit cracks in the grinding wheel.
(9) When installing the grinding wheel, you need to place 0.5~1.0mm pad of paper between the grinding wheel and the pin, and tighten evenly with a special wrench.
(10) When installing the grinding wheel, it should run at full load for 5 minutes, and the operator should avoid the front. After confirming that the grinding wheel is operating normally, it can be used.
The clamping of the hydraulic cylinder needs to meet the requirements, and you need to make sure that the grinder is in normal condition before departure.
It is necessary to eliminate oil stains, stains and floating dust in parts directly processed on the production and processing rollers in advance. According to the workpiece material, select the appropriate grinding wheel and grinding amount, and it is prohibited to grind the workpiece blank.
When loading a roll grinder and measuring a workpiece, the grinding wheel needs to be removed from the workpiece and stopped. Do not stop halfway when the workpiece and grinding wheel are not separated. When the grinding wheel is close to the workpiece, the tool cannot be moved maneuverably.
When working, it is forbidden for workers to leave the grinder or to take care of the grinder. If you need to leave due to power outage or other reasons, you should stop the grinding wheel after leaving the workpiece. When running the grinding equipment again, make sure all parts are in the same shape before running.
When the CNC roll grinder is working, you need to pay attention to some conditions of the transmission system, such as whether there are any problems with the oil and steam pressure, whether the refrigerant is poured steadily and clearly on the workpiece; whether there are any problems with the ambient temperature of the reducer motor, and whether there are any abnormal noises ;Whether the joystick is in place correctly, whether the standard parts are loose or moved, etc.
Do not place metal objects on the work surface or paint surface.
CNC machine tool roll grinder should have stability, applicability and rationality. The CNC machine tools manufactured by our company have a wide range of applications, are highly versatile, and have relatively complicated operation processes.