Maintenance of high frequency welded pipe unit
The high-frequency welded pipe unit will always be damaged during normal work. How to properly maintain it in daily life so as to prolong its service life is a problem that everyone cares about. Let me explain to you below.
In the process of use, it is necessary to operate in strict accordance with the operation procedures in the manual. Before the operation of the machine, it is necessary to check whether the various parts of the machine can work normally and whether there is any failure. Only when the parts and indicators of the machine are normal, we will It can be started and put into production, otherwise it will cause loss of machinery.
After checking the components of the high-frequency welded pipe unit, start the operation. In the process of mechanical production, it is necessary to ensure the stability of the temperature and production conditions of the machine. If the machine fails, we need to stop production in time and check which parts of the machine are faulty. , so as not to cause greater losses. The main faults include unstable mechanical operation and whether there are abnormal noises during operation. If there is a problem, it should be checked in time.
After the machine has been used for a period of time, it is necessary to regularly lubricate and clean the machine to ensure that it is clean. Only in this way can the machine run normally and it is lighter during use. The aging parts in the machine need to be replaced in time to ensure the normal operation of the machine. When the machine is not in use, the high-frequency welded pipe unit should also be kept well and cannot be discarded arbitrarily.
Common maintenance methods:
1. On weekdays, you should do a good job in the inspection of the high-frequency pipe welding machine, check whether the pipeline is normal, and truthfully record the mechanical condition of the solid-state high-frequency pipe welding machine. use.
2. The parts that need to be lubricated in the high-frequency pipe welding machine should be lubricated on schedule, and lubricated with special lubricants to prevent the welded pipe from rusting. Galvanizing is a good way to prolong the service life of the welding machine. The treatment usually includes degreasing (degreasing is to clean the oil stains and dirt on the outside of the black pipe, in order to prevent the effect of pickling and pickling, and can be burned or alkali to complete the daily alkali washing) washing, pickling, rewashing, etc.
3. Although alkaline cleaning has cleaned up some stains, acid cleaning and alkaline cleaning are different for pollution. The purpose of pickling is to remove the iron oxide scale on the mechanical surface of the high-frequency pipe welding machine. The pickling can be carried out at room temperature, and the metal corrosion is less. , The amount of hydrogen absorption is small, the compatibility of carbon black residue is small, the acid pickling forms oxides, the depth is large, easy to clean, and has no effect on galvanizing. The above introduces the maintenance and maintenance of high-frequency welded pipe units. I hope the above content will be helpful to you.