Maintenance instructions for high frequency welded pipe unit
First of all, in the process of use, you must strictly follow the operating procedures in the manual, and you must not overload and run the machine. You must check the machine before complaining about production or mechanical operation. Whether the parts can work normally, whether there is a fault, only when the various parts and indicators of the machine are normal, the machine can be started and put into production, otherwise it will cause mechanical losses.
The second is to restart the operation after checking the components of the high-frequency welded pipe unit.
During the production process of the machine, the temperature of the machine and the stability of production must be guaranteed. If the machine breaks down, it must be done in time. Stop production and check what's wrong with the machine so as not to cause more damage. The main faults are unstable mechanical operation, machine friction, and abnormal noise during operation. If there is a problem, it should be checked in time.
The third, after the machine has been used for a period of time, attention must be paid to lubricating and cleaning the machine regularly to ensure that the machine is clean. Only then will the machine function properly and be lighter during use. Aging parts must be replaced in time to ensure that the machine can work normally at all times. There is also a high-frequency welded pipe unit, which should be kept properly when the machine is not suitable for use.