Operation requirements and maintenance of wire drawing machine
Inverted wire drawing machine in the operation, the speed control requirements are very high, and inverted wire drawing machine in the operation of the precision requirements are very high, which requires a special mechanical device to provide an accurate and smooth line speed.
The inverted wire drawing machine itself is such a device, and its system has very high requirements for speed control. The whole system is more complex, and the control equipment requires coordination between each motor. The system is controlled by four servo motors, which can fully meet the real-time interaction between data.
In order to ensure the place of the side line of the track according to the algorithm, the line of wires required can be quickly calculated. Making full use of the servo internal firmware function, the total time calculated by the driver itself greatly omits the line position of the traditional inverted wire drawing machine control system. The instructions are then sent to the driver, ensuring that the lines are lined to minimize delays through the controller.
The motor of the inverted wire drawing machine is driven by the pulley and gear, which drives the drum placed on the output shaft of the reducer to rotate, and the traction wire completes the drawing. After drawing, the wire is led into the drop frame through the lead roller, and the drop frame of the inverted wire drawing machine rotates synchronously with the drum.
In the whole degree of automation is relatively high, the inverted wire drawing machine is larger and heavier than other wire drawing machines on the take-up reel, at least can reach more than two tons, effectively improve the use efficiency of the take-up reel weight, large degree to meet the technical requirements of the heavy plate, and the development of the inverted wire drawing machine is very considerable, of course, in the unloading operation is very convenient.