Precautions when disassembling a roll grinder
What are the precautions to be taken when disassembling a roll grinder?
Whether the grinding wheel is stopped or not, whether there is any foreign object on the guideway, whether the tailstock bolt is loosened or not, and whether the oil supply between the tailstock and the guideway is normal or not.
Precautions to be taken when disassembling the grinder when operating the roller grinder.
1、Check whether to stop when disassembling the grinding wheel; open the hydraulic pressure of the spindle to avoid damage to the surface of the axial tile by the impact of disassembly;
2、Check the guide rail or refueling to see if there is any foreign matter on the guide rail and clean it up in time;
3、Check whether the bolt is loosened and the locking hook is removed when moving the tailstock; whether the oil feeding between the tailstock and the guideway is normal.
4, in the replacement of grinding fluid filter paper, do not step on the filter paper tray, so as not to affect the deformation of paper walking.
5, in the replacement of grinding wheel spindle lubricant, pay attention to the bottom of the tank whether there are crystals or precipitation, clean up in time.
6、When replacing the pasteurized alloy tiles, the keyway and bonding surface must be kept clean;
7、When disassembling the lifting roll, make sure the starting device is disengaged; keep away from the top of the tailstock appropriately.