Several Important Checks for Straightening Machine Operation
1. Before using the straightening machine, check whether all the fasteners of the machine are tightened and whether the belt is tensioned.
2. Check whether the electrical appliance is complete.
3. The running direction of the main shaft of the straightening machine must conform to the direction of the arrow shown on the protective cover, otherwise the machine will be damaged and personal injury may be caused.
4. Check whether there are hard sundries such as metal in the crushing room of the leveler, otherwise the tool will be damaged and the operation of the machine will be affected.
5. The purity of the material must be checked before crushing, and metal hard impurities are not allowed to be mixed in, so as to avoid damage to the tool or cause accidents such as burning.
6. The oil cup on the straightening machine should always be filled with lubricating oil to ensure the normal operation of the machine.
7. Stop feeding the straightener before it stops. If it is not used continuously, remove the leftovers in the machine.
8. Regularly check whether the tool and the screen are damaged. If there is any damage, it should be replaced immediately.
9. When using the straightener, the body will vibrate slightly. Be sure to tighten the cover connection handle to avoid accidents.