Talking about the maintenance of the pipe making machine
The role of the pipe making machine in the work is getting more and more attention, so how can we improve its work efficiency? The author believes that only by knowing how to maintain the pipe making machine can improve the efficiency. The following will share with you the maintenance experience of the pipe making machine.
1. Always check the oil level indicator on the fuel tank, and the oil level should not be lower than the specified value.
2. When the fine oil filter is blocked by dirt, it needs to be replaced in time; when the coarse oil filter is blocked, it should be cleaned in time, once every 3 months.
3. Add oil to the fuel tank, it must be filtered, and impurities such as water, rust, metal chips and fibers cannot be mixed into the oil.
4. When starting the oil pump in winter or cold areas, it should start and stop, and repeat several times to make the oil temperature rise, and then start working after the hydraulic pump station operates flexibly.
5. All knobs on the hydraulic pump station shall not be moved by non-operators.
6. Always observe whether the power supply voltage has abnormal fluctuations, and repair it every 3 months or so.
The correct maintenance of the pipe making machine plays a very positive role in the efficiency and life of the equipment.
Our company operates a high-tech company that produces pipe making machines, galvanized pipe machines, welded pipe production lines, and welded pipe equipment.